How to Find and Turn Off Your Stop Tap (Before an Emergency)
Know where your stop tap is before a leak strikes. Learn where to find it, how to turn it off and what to do if it is stuck.
Call 020 3411 2027Read the guide
Your stop tap (also called a stopcock) is the valve that shuts off the water supply to your whole home. In a leak or burst pipe it can save you thousands of pounds in damage. Yet many homeowners have no idea where theirs is. Spend ten minutes finding it now, and you will be ready when an emergency strikes.
- Look under the kitchen sink first.
- Turn the stop tap clockwise to close it.
- Open the cold taps to drain the pipes.
- Label it and check it turns easily once a year.
Where is the stop tap in my home?
In most UK homes the main stop tap is where the water supply pipe enters the property. Check these places:
Look for a small tap or lever on a pipe (usually blue plastic or copper) coming up through the floor or wall. If you live in a flat, it may be in a shared cupboard or riser. Older homes may have it in a pavement or garden box outside, which is called an external stop tap or water company valve.
How to turn off the stop tap, step by step
-
Find the stop tap
Follow the cold water pipe from where it enters the house. The stop tap is usually on this pipe, close to a wall.
-
Turn it clockwise
Turn the handle or lever clockwise (right) until it stops. Do not force it. A stiff valve should move with firm, steady pressure.
-
Open the cold taps
Run the cold taps and flush a toilet to drain remaining water from the pipes. The flow should slow and stop.
-
Turn off the heating and hot water
Switch off your boiler and any immersion heater so they do not run without water. For burst pipes, follow our guide on what to do if a pipe bursts.
-
Call a plumber
With the water off, you can safely wait for an engineer. Our team covers the UK 24/7 and our rates are clearly published.
What if the stop tap is stuck or leaking?
Stop taps that are rarely used often seize up with limescale. If yours will not turn, do not use a wrench or pliers, as you could snap the spindle and cause a flood. Instead:
- Try a little penetrating oil around the spindle and wait a few minutes.
- Use the external stop tap or call your water company if you cannot shut off the supply.
- Call a plumber to replace a stiff or leaking stop tap before an emergency.
Keep your stop tap in working order
- Test it once a year. Turn it off and on again to keep it moving.
- Clear the space. Do not store cleaning products or boxes in front of it.
- Label it. Add a tag so everyone in the household can find it.
- Teach the household. Everyone should know where it is and which way it turns.
- Check before winter. A working stop tap helps if pipes freeze and split. See our tips on preventing frozen pipes.
Other isolation valves worth knowing
Many fixtures have their own small isolation valves, usually a slotted screw or small lever on the pipe under a sink, basin, toilet or appliance. These let you shut off one fixture without turning off the whole house, which is handy for a dripping tap or a leaking toilet.
Frequently asked questions
Which way do I turn a stop tap to turn it off?
Clockwise (right) to close and anticlockwise (left) to open. Some lever-style valves close when the lever is at a right angle to the pipe.
Is a stop tap the same as a stopcock?
Yes. Stop tap, stopcock and mains shut-off valve all refer to the valve that controls the water supply to your home.
What if I cannot find my stop tap?
Check the external stop tap outside, usually in a small cover near the boundary of your property. Your water company can also help. A plumber can trace the pipe and fit an accessible stop tap for you.
Will turning the water off damage my boiler?
No, but you should turn the boiler off so it does not run dry. Turn the water back on slowly and check for leaks before restarting the boiler.
Related guides
No Hot Water? 7 Common Causes and Quick Fixes
Read the guide →
What to Do in a Plumbing Emergency: A Homeowner's Guide
Read the guide →
7 Common Signs You Need an Emergency Plumber
Read the guide →Plumbing emergency? Don't wait.
Our engineers cover the UK 24 hours a day, 7 days a week. Pay only a £49 trip charge and get your quote on-site.
